Brackets to hold bottom rail stationary. Comonly used on door mounted blinds.Spacer Blocks (Outside Mount): Placed between mounting brackets and mounting surface, spacer blocks
add 1/4" between the blind and the mounting surface. Most commonly used on door mounted blinds.
2 on 1 Headrail: A 2-on-1 split blind is two separately functioning blinds mounted on the same headrail with a
one-piece valance. 2-on-1 splits are sometimes necessary on large widths because the product can become stressed and possibly begin to warp over time. The lift mechanism can be over stressed as well on large blinds due to the
weight of the materials when lifted. In other cases a split blind may be optimal for the installation. If you have a mullion, or divider in the window and wish to divide the window into two halves that can be operated separately a
split blind would be the solution.
3 on 1 Headrail: A 3-on-1 split blind is three separately functioning blinds mounted on the same headrail with a one-piece valance. 2 or 3-on-1 splits are sometimes necessary on
large widths because the product can become stressed and possibly begin to warp over time. The lift mechanism can be over stressed as well on large blinds due to the weight of the materials when lifted. In other cases a split blind
may be optimal for the installation. If you have mullions, or dividers in the window and wish to divide the window into separate parts that can be operated separately a split blind would be the solution.
Tile Cutout:
A tile cut-out is used to fit a blind where a portion of the window opening narrows. Typically, this is due to a tiled back splash.
