Speak with one of our helpful window blinds specialists!
Call us toll free at:
1-888-397-3768
 Monday-Friday 8am-4pm (CST)

Home | Blinds Measuring | Ordering | Policies | About Us | Testimonials | Our Factory

How to Measure & Install Shades

Return to Custom Roller Shades

How to Measure Shades

Tip:   Use a Metal Rule to Measure

Call us if you have any questions.  Customer accepts full responsibility for own measurment and holds Blinds Connection harmless.

Measuring the Length

Measure the full height of your window opening from top frame to lower sill.  (We will add 12" to your measurement.)  This extra 12" is the "safety margin" to permit the shade to be drawn full length with no danger of it being torn from the roller.

 

Measuring the Width

Inside Bracket Mounting (IBM)

Measure the exact distance between the points where the brackets are to be placed, inside the window casement.  (We will allow for bracket clearance.)

Outside Bracket Mounting (OBM)

Measure between the points where the brackets are to be placed.  It is recommended that the brackets be placed to allow 1/2" to 2" overlap on each side of the casement.

To Replace Old Shades

Width: Measure your old roller (not the cloth) from the outside edge of one metal cap to the other.  Measure as shown and specify "barrel measure."            Be sure to measure length next.

How to Install Shades

Standard Installation - Inside or Outside Brackets
  1. Bracket with open slot mounts on left side.
  2. Bracket with round hole mounts on right side.
  3. Hold rolled-up shade in position where brackets are to be installed.
  4. Mark location where brackets are to be installed.
  5. Screw brackets in place using two screws per bracket.  Be sure brackets are level.
  6. Hang shade in brackets.  Insert pin end of shade first in right bracket with round hole.  Then place other end in open slot bracket.
  7. Shade is ready to operate.

Reverse Roll Mounted Shades

Inside Installation
  • Bracket with open slot on right side.
  • Bracket with hole on left side.
  • Position brackets and proceed as in points 3 through 7.

Outside Installation
  • Bracket with open slot on right side.
  • Bracket with hole on left side.
  • Position brackets and proceed as in points 3 through 7.

For FREE color or fabric samples call toll free 1-888-397-3768

Be sure to check out our Custom Roller Shades,  Decorative Trims, Decorative Hem & Topper Styles, How to Measure Shades, Clutch Rollers and How to Install Shades for the Custom Roller Shades.  Call us for pricing, we welcome your interest in our fine products.

Call us at our toll free number (1-888-397-3768) if you have any questions regarding ordering of our products.
 

Blinds Selection
Softview Venetian Shades | Wood Blinds
Aluminum Mini-Blinds | Insulated Verticals

Shades Selection
Custom Roller Shades | Honeycomb Shades | Wood Shades

Shutters Selection
FineCraft™ Custom Shutters

Speak with one of our helpful window blinds specialists!
Call us toll free at:
1-888-397-3768
Monday-Friday 8am-4pm (CST)

E-mail:  sales@blindsconnection.com
 Fax Number:  (504) 734-9509

Home | Blinds Measuring | Ordering | Policies | About Us | Testimonials | Our Factory

Blinds Connection
Find us on The New Orleans Website Directory